PN: OBS55123CDL80
1.25G SFP Transceiver SC 1550nm 80KM Duplex SC be Compatible with Cisco, HUAWEI……
Features
Ø Optical interface compliant to IEEE 802.3ae 1.25GBASE-SC
Ø Electrical interface compliant to SFF-8431
Ø Hot Pluggable
Ø1550nm DFB transmitter, PIN photo-detector
Ø Operating case temperature: 0 to 70 °C
Ø Low power consumption
Ø Applicable for 10km SMF connection
Ø All-metal housing for superior EMI performance
Ø Advanced firmware allow customer system encryption
information to be stored in transceiver
Ø Cost effective SFP solution, enables higher port densities and
greater bandwidth
Ø RoHS6 compliant (lead free)
Applications
Ø 1.25GBASE-SC at 1.25Gbps
Ø Other optical links
Cisco Compatible List
| LPT-XFP10G-BXD-40 | 10GBASE-BXD XFP BiDi, Tx1330/Rx1270nm 40km LC DDM |
| LPT-QSFP40G-SR4 | 40GBASE-SR4 QSFP+, 850nm 150m MMF MTP/MPO DDM |
| LPT-QSFP40G-CSR4 | 40GBASE-CSR4 QSFP+, 850nm 400m MMF MTP/MPO DDM |
| LPT-QSFP40G-LR4 | 40GBASE-LR4 QSFP+, 1310nm 10km SMF LC DDM Duplex |
| LPT-QSFP40G-LR42 | 40GBASE-LR4 QSFP+, 1310nm 20km SMF LC DDM Duplex |
| LPT-QSFP40G-ER43 | 40GBASE-ER4 QSFP+, 1310nm 30km SMF LC DDM Duplex |
| LPT-QSFP40G-ER4 | 40GBASE-ER4 QSFP+, 1310nm 40km SMF LC DDM Duplex |
| LPT-SFP25G-SR85 | 25GBASE-SR SFP28, 850nm 100m MMF LC DDM Duplex |
| LPT-QSFP100G-SR4 | 100GBASE-SR4 QSFP28, 850nm 100m MMF MTP/MPO DDM |
| LPT-QSFP28-CWDM4 | 100GBASE-CWDM4 QSFP28, 1310nm 2km SMF LC DDM Duplex |
| LPT-QSFP100G-LR4 | 100GBASE-LR4 QSFP28, 1310nm 10KM SMF LC DDM Duplex |
| LPT-QSFP100G-ER4 | 100GBASE-LR4 QSFP28, 1310nm LWDM 25KM SMF LC DDM Duplex |
| LPT-QSFP100G-ER4L | 100GBASE-ER4L-S QSFP28, 1310nm 40km SMF LC DDM Duplex |
Description
LINKOPTO1550nm DFB 1.25Gbps SFP transceiver is designed to transmit and receive
optical data over single mode optical fiber for link length 10km.
LINKOPTO SFP 850m module electrical interface is compliant to SFI electrical
specifications. The transmitter input and receiver output impedance
is 100 Ohms differential. Data lines are internally AC coupled.
LINKOPTOk module provides differential termination and reduce differential
to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of
improved FR4 material or up to about 150mmof standard FR4 with one connector.
Quality Control
LINKOPTO Package
